How To Flash MIUI Rom Redmi Note 3 Pro with Lock bootloader

If our smartphones redmi note 3 snapdragon in a state bricked, or bootloop pattern or patterns locked or stuck in the logo,or you want to flash rom distributor to stable we have to go through the EDL fastboot mode with lock bootloader, now to enter EDL mode, do as follow step by step.

How to enter EDL mode redmi Xiaomi note 3 snapdragon

 - Settings - About Phone -> Touch 7 times on "MIUI version" to enable Developer Options Enable.
- Then Settings - Additional Settings - Developer Options -> USB debugging.
- Enable USB debugging and connect to a PC or laptop
- install ADB
- Download ROM xiaomi redmi note 3 snapdragon here
(ekstract to D and ekstrack again before change exstension to .tgz in second etstract)
- Now we are connected smartphone as ADB, check device manager will be as shown below.

- First download Fastboot_edl-v2.zip mode here
- Then extract the zip file on your pc or laptop
- Open the folder that was extracted and double-click Reboot.bat.

- then, reboot our smartphones in Fastboot mode by pressing volume down(-) + power button and then connect our smartphones on pc with usb then press enter.

- and then that our device will reboot to the EDL mode.

- Redmi note 3 snapdragon we will be in a position download mode and the red LED light turns on.

- and now we can flashing with mi tools.

How To flash Redmi note 3 pro with mi flash :

- Open Device Manager and Phone will be detected as QHUSB_BULK.

- After that, right click on QHUSB_BULK then update the driver.

- If installan are successful, we will see an additional port named Qualcomm HS-USB.

open mi flash 

klik reflesh and then choose flash all then press button flash.

wait proses until finish

done now boot up your redmi note 3 pro